0086 155 1557 1373
Installation of chin chin making machine:
1. Place the machine in a horizontal working space to ensure the machine is stable and reliable;
1. Place the machine in a horizontal working space to ensure the machine is stable and reliable;
2. Check the parts before use, whether the fastener is loose in transit, and whether the switch and power cord are damaged due to transportation, and timely take corresponding measures;
3. Check whether there are foreign objects in the rotating cylinder. If there is any foreign body, clean it, so as not to cause the cutter damage.
4. Determine that the power supply voltage corresponds to the local rated voltage.In outer garment grounding mark is reliable, the power supply cord elongation will find professional electrician machine power cords in whole extremely disconnected from the power supply, connected to the power supply, press the "ON" button, and check, V belt wheel steering is consistent with the logo for the correct;Otherwise, cut off the power and adjust the wiring.
5. When the machine is working, it is strictly forbidden to extend the hand into the barrel;
6. Before cleaning and disassembling, disconnect the power supply and stop the machine running;
7. To ensure safety, reliable grounding must be made at the ground mark;
8. Replace the calcium base grease every 3 months;
9. Do not press the switch with wet hand during machine operation.
If you have any other questions about the chin chin machine, chin chin cutter machine, chin chin fryer, packing machine, ect, contact me.
Email:ellie@machinehall.com
If you have any other questions about the chin chin machine, chin chin cutter machine, chin chin fryer, packing machine, ect, contact me.
Email:ellie@machinehall.com
Next:Introduction of Chin Chin Frying Machine