The use of hot sale peanut frying machine:

1. Add water into the frying machine first, and the water level reaches the water level until the water is cut out. Do not add too much water, because that water temperature measurement can not be measured water level, temperature, easy to cause boiling phenomenon.

2. If the cooking oil, the oil level is the size of a fried food, but the reservoir must be higher than the temperature sensor 3-4 centimeters.

3. Close the power switch in the distribution box, then open the power switch of the control panel, at this time the power indicator is bright, and the temperature controller is also displayed on power.

4. Check the temperature control instrument is shown at the bottom of the green, then according to the process of setting fried frying temperature, the average temperature is between 160-220 DEG C, but not higher than 230 degrees, because the oil burns is 230 DEG C, the temperature is below 50 DEG C.

5. When the oil temperature reaches the set temperature, it can be fried food. The temperature of frying process is controlled by itself, and it is not necessary to think otherwise.

6. Put the oil oil in the process of using the program: if longer, need to replace or clean up oil frying machine health, do not discharge sewage, should open the drain of drained oil, then open the drain valve, can be discharged. This must be done only when the oil temperature is below 80 degrees centigrade

7. When fried food dregs is excessive, with the increase of the heating pipe cleaning intensity and sewage discharge times.

If you want to know more about the peanut fryer machine,contact me.
Email:ellie@machinehall.com
Skype:leo.liufan